We install the machine on site, load the software and train your operators with your own product.
Included in machine price
When the machine reaches your workshop, our installation team positions it, levels it, connects electrical and compressed-air supplies, installs the vacuum pump and loads the control software. Your shop is production-ready on the first day.
3-day training program
- Day 1: Safety, machine introduction, zero point and tool offsets
- Day 2: CAM software, part drawing, toolpaths and nesting
- Day 3: Production with your own product, maintenance and basic troubleshooting
An operator certificate is issued at the end. For new staff, a video training library and weekly online Q&A sessions are opened.
Scope of service
- On-site installation and leveling
- 3 days hands-on training
- Operator certificate
- Video training library
Installation and Operator Training — get a quote
Fill in the form and we will get back to you as soon as possible.
Frequently asked questions
Which size should I choose for a CNC router?
Choose by the board size you use most. For 1,220 × 2,440 mm boards, the 1325 (1,300 × 2,500) suits; for 1,830 × 2,750 mm boards, the 1530 or 2231 models fit. We recommend a working area at least 50 mm larger than the board for edge margin.
Is an ATC (automatic tool changer) necessary?
If you work with a single tool it is not needed, but if you use several tools for cutting, milling and drilling, an ATC shortens process time by about 30% on average and reduces operator error. It is recommended for serial production.
Up to what thickness can plasma cut?
Clean cut is 25 mm with a 130 A source and 32 mm with 200 A; severance cuts reach 38 and 50 mm respectively. On thinner plate, speed and edge quality are much higher.
Which software does the machine work with?
With Kerfa Nest you can use DXF and DWG files directly. We also prepare post-processors for popular CAM software and support XML module input from furniture design programs.
What infrastructure is needed for installation?
A level concrete floor, 380 V three-phase power, earthing, 6-8 bar compressed air and, for dusty work, a dust extraction system. You can download our Infrastructure Guide or use our free workshop planning service.